Japanese Bee Hive Yoshida type Hive 100 the day before of year

The crosspiece part of the nest frame on is made this time though the Hive was made last time.

24 and 27 decided to be changed to the single-piece construction this time though in the book, it was when the section put triangular stick 27 on parts 24 because it seemed to peel off when time passed. Only this material is made today.
It is because the nest along the frame is completed because the bee begins to build the nest based on the triangular top why the top of the nest frame is a triangular section.
This triangular geometry can be used also with the Hive named [toppuba-haibu] (Top bar Hive).

Purchase of wood first of all. The rectangular lumber of 3cm in the section corner was bought for the length of 300mm beforehand in the do-it-yourself store completely.
12 was able to be taken by buying two one of 2m.

Work in house from here.
First of all, the part of the ear is made.
The cut of length is put first. Fixing with the rectangular lumber in length made [**gu] because it was difficult.
The rectangular lumber is set in the shallow ditch, and it passes it through teeth of the table saw .

The cut of length entered by this.

The incision is sideways put this time and [mimi] is chopped off. The right angle was put out and cut by using the surplus material when the Hive was made for JIG

Yes, ear cut.
All ear is cut repeating the same work.

Well, it is a diagonal cutting of the problem ..here...
For this, it thought about JIG. It is the one that the triangular rectangular lumber bought in the do-it-yourself store was put on the plywood board.

This is fixed to the table saw with the packing tape, and more and more cutting.
This how to cut it was considerably strained because the first time and teeth were near the cutting material completely.
[Zai] used, pushed not the hand but the chip, and prevented the hand from going near teeth.

A beautiful triangular section was able to be done by cutting both sides.

Cutting was able to be processed and to process 12 ..long and repeat (Had a hard time in the continuation of the tension).. all safely. ..happiness..

Then, it immediately puts it on the Hive made the other day.
The space has become empty because it made it from the rectangular lumber of 30mm though it was 1 'sun' (33.3mm) in the width of the frame in the description of the book.
However, just another 11 pieces became boxes with fit because it had installed.

Well, the nest frame will be scheduled to be assembled next time. To the enjoyment.

前回の 巣箱 製作はこちら

作成日： 2010-03-08 00:00:00